Embraiage is one of the elements most used vehicle And therefore, also one of those who suffers the most wear and tear.
Mal use of clutch can cause only 5,000 kilometers to last, while used correctly can last up to 400,000 kilometers.
In this article, we will explain how to know when it should replace Embra- and how to exchange.
Also, let's give tips to have the longest possible duration.
As a driver concerned with your vehicle, know the safety you can not miss in your car.
What is the clutch
Embraiage is the pedal which allows you to change from one speed to another and reduce or transmit engine power to the gearbox.
The Clutch Kit is one of the essential pieces For any car with manual gearbox.
Therefore, it is very important to keep in mind that if there is a need to change it, it must be done on time and not leave it later.
When to change the clutch of the car?
Although mileage is not an exact indicator, it is recommended to change clutch 200,000 kilometers in the car.
These are the signs that tell us to change the clutch:
-Oh stepping the clutch pedal, it is more hard than normal.
-O when treading the accelerator pedal, the car does not speed up but the engine revs rose.
When accelerating to notice a Own smell The burnt or a strange noise that did not hear before.
How to change the clutch of the car? The Embra-
It is better to be an expert to change it, but if you have knowledge of mechanics, you can do it with great patience. We left a brief guide how to do that.
Firstly, you should know what the clutch kit is. Consists of spring mechanism that presses the disc against the steering wheel.
The pieces that make up the clutch kit are: the clutch disc, the pressure plate and the backrest.
To the parts That you will need to change the clutch are: a centralizer of clutch, gloves, a hydraulic monkey, a toolbox, a sandpaper and finally some support columns.
Raise the car
The first thing you should do is lift the car, remove the left front wheel and disconnect the battery. To do this, open the hood, remove the black terminal and then the red (the order is very important).
Remove the pieces connected to the clutch
Remove gearbox controls, then control of the clutch, followed by the starting sensors, transmission and gearbox.
Finally, the gearbox should be removed, it is important to do so with help as it is very heavy.
Once all these parts are removed, you should see the clutch plate.
Enter the new bearing
Remove the 6 screws you have, the plate and the disc. Enter the new bearing and replace all parts removed in the reverse order.
Turn on the engine
Turn on the vehicle engine and make sure everything is running correctly, then place the steering wheel again and the process will be closed.
How much does it cost to change the clutch?
If you decide to take the car to a workshop to change the clutch, instead of doing it for itself, the price From this operation will be between 100 and 300 euros.
The price varies according to the model and car brand.
It is always recommended that this process be done by a professional.
How to correctly use clutch
One thing is certain: the clutch will be wear over.
However, there are certain driving habits which, if done correctly, can prolong the life of clutch.
These habits are:
Don't go with your foot in the clutch while driving
A bad habit that drivers have is to leave clutch pressed while conducting. This action is very common, but it is a graveas this pedal should only be triggered in the change of speed.
Constantly tanning clutch can cause unnecessary effort and shorten its duration.
Step to the bottom, let go gently
During the change of speed, often by carelessness or ignorance, the foot of the pedal is very quickly quickly. This process must be executed gently to prevent clutch from wearing so quickly.
Should not have moved changes when stopped
When the car stops at the red light of the traffic light, often the first speed is engaged, leaving the car prepared to start. The correct thing is to put the car in dead point.
The continuous pressure exerted on the clutch by leaving a speed engaged causes a fastest deterioration In clutch, because the system is working without need.
